PCA9517D,118, Драйвер шины I2C одноканальный 400кГц

Изображения служат только для ознакомления.
См. документацию товара

IC REDRIVER I2C 1CH 400KHZ 8SO

Драйвер шины I2C одноканальный 400кГц
Код товара: 227124
Дата обновления: 14.07.2024 16:10
Доставка PCA9517D,118 , Драйвер шины I2C одноканальный 400кГц в город Калининград
Boxberry
от 9 раб. дней
от 761
DPD РФ
от 7 раб. дней
от 670
Деловые линии
от 10 раб. дней
от 1586
Почта РФ
от 15 раб. дней
от 290
EMS
от 4 раб. дней
от 1363
СДЭК
от 12 раб. дней
от 833
* Стоимость и сроки доставки являются ориентировочными. Итоговая стоимость и срок будут рассчитаны на странице оформления заказа.

Технические параметры

  • Корпус
    SO-8
  • Тип упаковки
    Tape and Reel (лента в катушке)
  • Нормоупаковка
    2500 шт
  • Вес брутто
    0.1 г.

Описание PCA9517D,118

The PCA9517D, 118 is a level translating CMOS I²C-Bus Repeater provides level shifting between low voltage and higher voltage I²C-bus or SMBus applications. While retaining all the operating modes and features of the I²C-bus system during the level shifts, it also permits extension of the I²C-bus by providing bi-directional buffering for both the data (SDA) and the clock (SCL) lines, thus enabling two buses of 400pF. Using the repeater enables the system designer to isolate two halves of a bus for both voltage and capacitance. The SDA and SCL pins are overvoltage tolerant and are high-impedance when the repeater is unpowered. The 2.7 to 5.5V bus port-B drivers behave much like the drivers on this device, while the adjustable voltage bus port-A drivers drive more current and eliminate the static offset voltage. This results in a low on the port-B translating into a nearly 0V low on the port-A which accommodates smaller voltage swings of lower voltage logic.

• Bidirectional buffer isolates capacitance and allows 400pF on either side of the device
• Footprint and functional replacement
• Active high individual repeater enable input
• Open-drain input/outputs
• Lock-up free operation
• Supports arbitration and clock stretching across the repeater
• Powered-off high-impedance I²C pins
• Latch-up testing is done to JEDEC standard JESD78 which exceeds 100mA

EU RoHSCompliant
ECCN (US)EAR99
Part StatusActive
HTS8542.39.00.01
TypeRepeater
Maximum Clock Frequency (kHz)400
Input Signal TypeI2C
Typical Input Capacitance (pF)6
Minimum Operating Supply Voltage (V)0.9/2.7
Maximum Operating Supply Voltage (V)5.5
Typical Operating Supply Voltage (V)5|3.3|2.5|1.8
Maximum Supply Current (mA)5
Maximum Power Dissipation (mW)100
Minimum Operating Temperature (°C)-40
Maximum Operating Temperature (°C)85
PackagingTape and Reel
Pin Count8
Supplier PackageSO
MountingSurface Mount
Package Height1.45(Max)
Package Length5(Max)
Package Width4(Max)
PCB changed8
Lead ShapeGull-wing
Вес, г0.15

Полные аналоги
Хотите получить образцы?
Заказать образец